AP 900 Cruise Control

Fully fitted from £475.00

The AP-900 series is a Drive -By- Wire Cruise Control and Speed Limiter designed to fit today’s drive -by- wire vehicles where there is an electric pedal.

Category:

Description

The AP-900 series is a Drive -By- Wire Cruise Control and Speed Limiter designed to fit today’s drive -by- wire vehicles where there is an electric pedal.

User Benefits

  • Helps to reduce fuel consumption and exhaust emissions (lowering your carbon footprint).
  • Allows you concentrate on the road and not your speedometer.
  • Helps avoid unintended speeding.
  • Allows you to set a maximum vehicle speed limit in safety camera enforcement areas.
  • Reduce driver fatigue and enhance driver comfort.

AP-900 Electric Cruise Control System Series

The AP-900 series is a professional Drive-By-Wire (DBW) Cruise Control and Speed Limiter system especially designed to fit today’s modern drive-by- wire vehicles where there is an electric pedal. Moreover the AP-900 series are also compatible for CAN bus signal to reduce the installation time. In order to get the correct settings, the AP-900 Cruise Control programs all parameters by itself using a new self-learning technology. The AP-900 Cruise Control can also be fitted to a lot of cars for electric pedal system.
Tested and approved by TUV and E1.

The Cruise Control Functions / Features

Functions Features
ON/OFF Disable Cruise Control, (Safety Override)
SET Set cruise control at present speed
ACCEL Accelerate vehicle and set to new speed
TAP UP Tap speed up by 0.6 mph ( 0.9 Km/h ) per tap
DECEL Decelerate vehicle and set to new speed
TAP DOWN Tap speed down by 0.6 mph ( 0.9 Km/h ) per tap
COAST Disengage cruise control
RESUME Resume last set speed
MEMORY Press and hold button Memory I or II to program or select your desire speed

The Speed limiter Functions / Features

Functions Features
SET Press the SET key to set the variable speed limiter at the current speed
TAP UP One tap up will increase the variable limit for 1 km/h
STEP UP Press and hold the SET key for over 2 seconds then release the SET key for step up, the variable limit speed will increasing in 10km/h step
RES Once the variable limit has been departed, user may press the RES key for resume to the previous limit settings
TAP DOWN One tap down will decrease the variable limit for 1 km/h
STEP DOWN Press and hold the RES key for over 2 seconds then release the RES key for step down, the variable limit speed will decreasing in 10km/h step
COAST SWITCH To depart the variable speed limit , user may press the COAST key
MEMORY Press and hold button Memory I or II to program or select your desire speed